Aesculap
High-frequency surgical device GN300
Legend
1 LED display: Ready to store a device setting
2 Key for storing a complete device setting
3 Displaying the selected memory
4 Save buttons 1-3
5 LED display: Device ready to switch on (mains on)
6 LED display: Device on (device ready for operation)
7 Device on/off switch
8 Dosage display for "bipolar CUT"
9 LED display: "bipolar CUT" mode (yellow)
10 Key to increase the "bipolar CUT dosage"
11 Key to decrease the "bipolar CUT dosage"
12 Dosage display for "bipolar COAG"
13 LED display: "bipolar COAG" mode (blue)
14 Key to increase the "bipolar COAG dosage"
15 Key to decrease the "bipolar COAG dosage"
16 Dosage display for "monopolar CUT"
17 LED display: "monopolar CUT" mode (yellow)
18 Key to decrease the "monopolar CUT dosage"
19 Key to increase the "monopolar CUT dosage"
20 LED display: Modulation index 4 (M4)
21 Key for modulation indices 2-4 (M2, M3, M4), monopolar
22 LED display: Modulation index 2 (M2)
23 Key for modulation index 1 (M1), monopolar
24 LED display: Modulation index 1 (M1)
25 LED display: Modulation index 3 (M3)
26 Dosage display for "monopolar COAG"
27 LED display: "monopolar COAG" mode (blue)
28 Key to decrease the "monopolar COAG dosage"
29 Key to increase the "monopolar COAG dosage"
30 LED display: Monopolar COAG spray
31 Key for monopolar COAG spray
32 Key for monopolar COAG normal
33 LED display: Monopolar COAG normal
34 LED display: Bipolar pedal assignment
35 Sockets for bipolar cable with banana jack (USA cable)
36 Socket for bipolar cable
37 Socket for foot switch
38 Bar display for Vario foot switch
39 Toggle key for monopolar/bipolar pedal assignment
40 LED display: Monopolar foot switch mode
41 LED display: Monopolar finger switch mode
42 Output jack for HF monopolar 3-pin plug (US standard)
43 Output jack for HF monopolar
44 LED display: Neutral electrode "Type 1" mode
45 LED display: Neutral electrode "Type 2" mode
46 LED display: Neutral electrode "Type 3" mode
2
®
®
High-frequency surgical device GN300
Aesculap
47 LED displays for indicating the status of the neutral electrode
48 Neutral electrode jack
49 Equipotential bonding connector
50 Power input combi-device with double fuse holder and mains voltage
selection bit
51 Nameplate
Symbols on the front panel
Device on/off
Save complete device setting
Save buttons 1–3
Increase dosage
Reduce dosage
Key for modulation index 1 (M1), monopolar
Key for modulation indices 2-4 (M2, M3, M4), monopolar
Key for monopolar COAG normal
Key for monopolar COAG spray
Toggle key for monopolar/bipolar pedal assignment
Symbol for foot switch