J.P. Bowlin Sartorius Cubis II Manual página 806

Accessories
16 Accessories
This table contains a selection of the accessories that can be ordered. For information on other products, please
contact Sartorius.
Article
Thermal transfer | thermal printer for GLP | GMP printouts on continuous
paper and labels
Connection cable for operating display, length 3 m
Connection cable with RS232 adapter, USB-C to RS232, 9-pin
Ethernet extension, 1 m
Motion sensor with USB connection cable
Interior draft shield
Motorized
Manual
Climate module (connection to rear wall of weighing compartment)
For determining temperature, air humidity and air pressure
For determining temperature, air humidity and air pressure, with
DAkkS calibration certificate
Climate module tower (USB connection), for determining temperature,
air humidity and air pressure
Glass insert to reduce the height of the weighing compartment
Sample holder
Configurable for sample bulbs of up to 50 mL
For Safe-Lock 2 mL sample tubes
®
For Safe-Lock 5 mL sample tubes
®
For bottles of up to 40 mL
For coronary stents
For syringes
Filter weighing pan, including protective plate for rear wall of weighing
compartment
For filters up to 75 mm
For filters up to 150 mm
Weighing scoop holder
Weighing pan
90 mm weighing pan, slotted
50 mm weighing pan, slotted, with protective plate for 50 mm
weighing pan
Dust cover
Under-pan hook for below-balance weighing
88 Operating Instructions Cubis | MCA Models
®
Quantity Order Number
1 YDP30 | YDP30-NET
1 YCC01-MCD3-3
1 YCC-USB-C-D09M
1 YCC-RJ-CAT7
1 YHS02USB
1 YDS125A
1 YDS125U
1 YCM20MC
1 YCM20MC-DAKKS
1 YCM20MC tower
1 YDSHR
1 YSH02-3
1 YSH14-3
1 YSH18-3
1 YSH22-3
1 YSH12-3
1 YSH46-3
1 YSH35-3
1 YSH30-3
1 YSH26-3
1 YWP10-3
1 YWP09-3
1 YDCC2MCA
1 On request