Publicidad
Idiomas disponibles
Idiomas disponibles
System Settings
50
Operating Instructions Cubis
7
System Settings
7.1
Switching the Device On or Off
If the device is being connected to the power supply for the first time, or
after restoring the factory settings: The device is switched on and the Setup
Wizard opens. All steps in the Setup Wizard must be completed.
If the device is switched on after the Setup Wizard is complete and no
passwords have been assigned for the user profiles: The user profile for the
last user to be logged in is loaded.
Procedure
If the Setup Wizard is shown: Follow the instructions in the Setup Wizard
t
in the operating display.
If the Setup Wizard is not shown: The login display is shown or the user
y
profile of the last user to be logged in is loaded.
To switch the device off: Disconnect the device from the power supply.
t
7.2
User Login or Logout
Procedure
If the name of the desired user profile is displayed in the entry field (1) of
t
the login display: Press the [Login] button.
If the name of the desired user profile is not displayed in the entry field of
t
the login display:
1
Tap on the entry field in the login display.
t
The user selection opens.
y
Press the name of the desired user profile.
t
If a password has been assigned for the desired user: Enter the
t
password in the entry field and press the [OK] button.
The user profile opens and the main menu or the last task being
y
performed by the active user is displayed.
To log out the active user profile from the device: Press the [Logout]
t
button.
| MCA Models
®
Publicidad
