J.P. Bowlin Sartorius Cubis II Manual página 791

Procedure
Download the QAPP Center package from the Sartorius website onto
t
the USB mass storage device. To do this, download the "Cubis
Firmware" file.
If this relates to a zip file: Unpack the QAPP Center package on the USB
t
mass storage device. The files must be saved in the main directory (at
root level). The files must not be copied into a folder.
Insert the USB mass storage device with the QAPP Center package into
t
one of the device's USB-A connections.
Select the "Install QAPP Center" menu entry in the "Settings" / "Device
t
Maintenance" menu.
Select "USB stick" as the connector.
t
Select the desired package.
t
Once the QAPP Center update is complete: Confirm successful
t
installation with the [OK] button.
Existing tasks remain unchanged after the QAPP Center update. In the
y
existing tasks, the original QAPP versions are used.
In order to use the new QAPP version: Create a new task with the new
t
QAPP version. Existing tasks are not automatically adapted via the
QAPP Center update.
Operating Instructions Cubis
Cleaning and Maintenance
MCA
®
| MCA Models
®
73