J.P. Bowlin Sartorius Cubis II Manual página 769

7.3 Performing System Settings
Default settings can be adjusted for the device and the applications in order
to align with the ambient conditions and individual operating requirements.
The following settings are necessary to operate the device together with
connected components:
— Set up the communication of the connected devices
— Set up additional components
The following settings are recommended to set up the device:
— Set the behavior of the isoCAL function
— Set the behavior of the motorized draft shield (only for devices with a
motorized draft shield)
— If the associated QAPP is activated and the LDAP server is configured:
Enter a password.
Procedure
Open the main menu.
t
Press the [Setup] button.
t
To adjust settings: Open the desired submenu.
t
Select the desired configuration value.
t
Exit the menu.
t
With some settings, the [Booting device] display appears in the
y
operating display and the device restarts.
7.4 Using the Help Function
If help texts are available in a menu: The [Help] button is shown.
Procedure
Press the [Help] button.
t
The help texts are displayed.
t
To navigate through the help text: Swipe the text downwards or upwards.
t
If the full text search is to be used:
t
Press the [Search] button and enter a search term.
t
The [Active Search] button appears. The search hits are highlighted in
y
yellow.
To switch between the search hits: Press the [Next] and [Back]
t
buttons.
Operating Instructions Cubis
System Settings
| MCA Models 51
®