J.P. Bowlin Sartorius Cubis II Manual página 786

Operation
68 Operating Instructions Cubis
8.12.2 Executing the "Statistics" Function (from"Essentials"
QAPP Package)
The "Statistics" application saves up to 1000 weight values and evaluates
these statistically.
The following values are saved and exported by the statistics application:
— Number of components
— Mean value
— Standard deviation
— Variation coefficient
— Sum of all values
— Lowest value (minimum)
— Highest value (maximum)
— Spread: Difference between maximum and minimum
The "Statistics" application can be combined with the following functions:
— Unit change, only available in the weighing display, before saving the
initial weight value
— ID marking
— Automatic taring
Procedure
Open the main menu.
t
Start the task for the "Statistics" application.
t
Press the [Zero] button.
t
Place a sample on the weighing pan.
t
To start the recording of the statistics: Press the [Confirm] button.
t
The current weight value is saved and the device is automatically tared.
y
If the next value is to be saved:
t
Remove the sample on the weighing pan.
t
Place a new sample on the weighing pan and press the [Confirm]
t
button.
To display an overview of the saved data: Press the [Report] button.
t
To print the current statistics: Press the [Print] button.
t
To exit the current statistics, and to delete the saved values: Press the
t
[Exit] button.
| MCA Models
®