J.P. Bowlin Sartorius Cubis II Manual página 777

8 Operation
8.1 Observing Warm-up Time
After connecting to the power supply, the warm-up time must be observed.
This enables the device to reach its required operating temperature and
ensures accurate values during weighing processes.
If this relates to a conformity-assessed device: The weight value is marked as
invalid during the warm-up period.
Procedure
Please ensure that the warm-up time is observed (see
t
Chapter "15.6 Wait Times", page 82).
8.2 Manually Opening and Closing the
Draft Shield
All doors can be fully or partially opened.
Procedure
To open the manual draft shield, e.g. the right-hand door: Take the
t
corresponding door handle and push backwards.
To close the manual draft shield, e.g. the right-hand door: Take the
t
corresponding door handle and push it fully forwards.
8.3 Opening and Closing the Motorized
Draft Shield
8.3.1 Opening or Closing on the Operating Display
Requirements
The motorized opening and closing of the draft shield is configured (see
Chapter 7.8, page 54).
Procedure
Press the palm-operated key. This enables the motorized draft shield to
t
be opened or closed motorically according to the stored setting.
Operating Instructions Cubis
Operation
| MCA Models 59
®