J.P. Bowlin Sartorius Cubis II Manual página 784

Operation
66 Operating Instructions Cubis
8.9.4 Printing Saved Values
Procedure
Press the [Print Memory] button.
t
The print memory opens and a list of all saved values is displayed.
y
To start the print process using the print profile embedded in the current
t
task: Press the [Print] button.
A file, e.g. a PDF file, is produced and sent to the printer defined in the
y
print profile. For two print profiles with different connectors: The print
processes will be started in succession.
8.9.5 Exiting the Task
Procedure
Press the [Exit] or [Menu] button.
t
If additional values are to be saved in the print memory:
y
A dialog for prematurely ending the task appears.
y
To return to the weighing display and print the saved values: Tap on
t
the [Yes] button and print the saved values.
To exit the task and delete the saved values from the print memory:
t
Press the [No] button.
The task ends and the main menu is displayed.
y
8.10 Viewing the Data Storage Device
The weight values are stored in the data storage device along with the date,
time, and process number. The content of the data storage device can be
searched and sorted using a filter. The data storage device has a ring buffer.
This means that the oldest data records can be overwritten by new ones.
The data storage device is designed for a specific number of data records
(for the number of data records see Chapter "15.10 Data Storage Device",
page 84).
The operator is responsible for regularly exporting the entries for archiving
in the data storage device. The available storage capacity is displayed to the
operator.
The data storage device is verifiable. The proper functioning of the data
storage device must be ensured for verification by saving and checking
some values.
| MCA Models
®