J.P. Bowlin Sartorius Cubis II Manual página 781

8.6 Creating a Task
The QAPP applications must be configured in a task so that they can be
executed, e.g. defining weighing and print profiles.
Procedure
Open the task.
t
Press the [New] button.
t
A list of the activated applications is displayed.
y
To select an application: Press the desired application.
t
The wizard for creating a new task starts.
y
Follow the wizard's instructions in the operating display.
t
8.7 Adding Weighing and Print Profiles to a Task
Weighing or print profiles must be added to a task in order to be used. The
weighing and print profiles must be configured in the Settings menu.
Procedure
Open the task.
t
Start the wizard to create or edit a task and follow the wizard's
t
instructions in the operating display.
8.8 Weighing
When weighing chemicals, suitable vessels must be used for the material to
be weighed. This makes it possible to prevent damage to the device or its
accessories.
Requirements
The device is leveled and adjusted.
Procedure
Start a task with weighing function.
t
Press the [Zero] button.
t
If below-balance weighing is being carried out: Suspend the sample on
t
the hook for below-balance weighing, e.g. with a wire.
Operating Instructions Cubis
Operation
| MCA Models 63
®