J.P. Bowlin Sartorius Cubis II Manual página 757

Level 1 Level 2
Device Date and time
settings
Safe weighing
Preload
Calibration/
adjustment report
Minimum weight*
Measurement
uncertainty*
Device ID
Electronic signature*
* If a related QAPP is activated: The menu is shown.
Level 3
NTP configuration
Set the date and time
isoCAL execution mode
isoCAL limit rule
User-defined warning
limit
Safety level
Show current preload
Set preload
Delete preload
Automatic printout for
isoCAL
Automatic printout for
cal./adj. Task
Print profile
Sign report
Operating Instructions Cubis
Operating Design
Description
Activate or deactivate time synchronization
via NTP.
Enter the date and time. Determine the
time zone.
Set the isoCAL function.
Define rules for triggering the isoCAL
function.
Specify the warning limit for the maximum
percentage deviation compared to the
reference weight. When the warning limit is
reached, a message is displayed.
Set the alert level for the message indicating
that the isoCAL function must be executed.
Displays the currently set preload.
Sets a preload for technical equipment that
needs to be constantly on the device. In this
case the maximum capacity is reduced by
the set preload.
Deletes the set preload.
Activates the data output for the isoCAL
function.
Activates the data output for the calibration
and adjustment function.
Defines the output device on which a
printout must be carried out.
Functions for monitoring the permissible
operating range.
Functions for dynamic display of the
measurement uncertainty for the weight
value.
Determine the device identifier.
Activate or deactivate the electronic
signature.
| MCA Models
®
39