J.P. Bowlin Sartorius Cubis II Manual página 764

Installation
46 Operating Instructions Cubis
5.9 Installing the Draft Shield
Procedure
Remove the operating display from the device.
t
Install the upper door. To do this, insert the two door panel mounts into
t
the two guide rods on the side of the device and push backwards.
Install the right and left doors. To do this, insert the door panel mounts,
t
one after the other, into the guide rods at the bottom on the side of the
device, and push backwards.
Insert the panel mount for the front panel into the recesses in the front
t
of the device.
| MCA Models
®