2
Safety Instructions
2.1
Intended Use
The device is a high-resolution balance, which can be used in laboratories.
The device was developed to accurately determine the mass of materials in
liquid, paste, powder, or solid form.
Appropriate containers must be used for loading certain materials, e.g.,
when weighing chemicals.
The device can be operated as follows:
— In stand-alone operation
— Connected to a PC
— Integrated into a network
The device is intended solely for use in accordance with these instructions.
Any further use beyond this is considered improper and may impair the
protection supported by the device, e.g. protection against mechanical
dangers.
Foreseeable Misuse
The following applications are not permitted: Operation under any
atmosphere other than the normal atmosphere.
Operating Conditions for the Device
Do not use the device in potentially explosive environments. Only use the
device indoors.
Do not use the device in a vacuum or negative pressure environment
(maximum air pressure see Chapter "15.3 Ambient Conditions",
page 80).
Do not use physical measures to alter the as-delivered state of the device,
and only connect approved accessories (see Chapter "16 Accessories",
page 88).
Adhere to the maintenance and calibration intervals for the device (see
Chapter "9.3 Maintenance Schedule", page 71).
The device may only be used with the equipment and under the operating
conditions described in the Technical Data section of these instructions.
2.1.1
Modifications to the Device
If the device is modified: Persons may be put at risk. Device-specific
documents and product approvals may lose their validity.
For queries regarding modifications to the device, contact Sartorius.
Operating Instructions Cubis
Safety Instructions
| MCA Models
®
9