Bodum BISTRO Instrucciones De Uso página 15

USING THE TIMER
LOCKING THE
CONTROL PANEL
The timer function enables delayed baking. The shown time is
always the time duration until completion for the currently active
baking program. The maximum duration is 15 hours, indicated via
15:00. The minimum is the processing time of the currently selected
baking program. With the timer active, the hourglass is shown on the
LCD screen as an indicator for timer operation.
CAUTION: With the programs 10, 12 and 13 the timer function is not
available. However, via the +TIME and -TIME buttons, the processing
time will be set (e.g. the baking time with program 13). In contrast
to this, the Timer setting for the programs 1-9, 11 and 14 will NOT
change the processing time of any program phase of the baking pro-
gram. Instead, the baking program will be started belatedly. Thus, to
avoid overheating of your ingredients, it is important to observe the
pre-set time icon on the LCD screen especially when using the Bake
program (13).
NOTE: However, if you have set the timer, you should put all the
ingredients into the bread pan or ingredients box (coarsely chopped
nuts, whole grain), before starting the program. In this case, how-
ever, fruits and nuts should always be cut into smaller pieces.
NOTE: Do not use the timer function when working with quickly spoil-
ing ingredients such as eggs, milk, cream or cheese. The quality of
these ingredients will degrade, when not cooled.
1. At first, select the program via the MENU button. Then adjust loaf
size (WEIGHT button) and degree of browning (CRUST COLOR
button), as these settings may affect the processing time. See:
"Starting the Baking Process".
2. Thereafter, use the +TIME and -TIME buttons to set the time dura-
tion until completion shown on the LCD screen. With the Timer
active, the icon of pre-set time flashes on the LCD screen.
TIP: The delay time is including the baking time of the chosen pro-
gram. Thus, after the shown time elapsed, there is hot bread in the
Bread Maker ready for being served after leaving it cool down for
some minutes.
3. Touch the START/STOP button to start operation. The icon of
pre-set time and the dots of the time display will flash on the
LCD screen and a countdown will show the remaining time. You
will have fresh bread at the desired time. If you don't take out
the bread immediately, the keep warm time of 1 hour starts. See:
"Keep Warm Function".
You can disable the control panel to protect the bread maker from
any unintended input.
Press the buttons WEIGHT and CRUST COLOR simultaneously to
lock the control panel. A signal sounds an the
the LCD screen. Thereafter there will be no respond to touching any
single button on the control panel.
IMPORTANT: By locking the control panel, you will disable even the
START/STOP button!
15
is displayed on
EN