Service-Center; General Power Tool Safety Warnings - REMS Multi-Push SL Instrucciones De Servicio

deu
8. REMS Vertrags-Kundendienstwerkstätten
Firmeneigene Fachwerkstatt für Reparaturen:

SERVICE-CENTER

Neue Rommelshauser Straße 4
D-71332 Waiblingen
Telefon (07151) 56808-60
Telefax (07151) 56808-64
Wir holen Ihre Maschinen und Werkzeuge bei Ihnen ab!
Nutzen Sie in der Bundesrepublik Deutschland unseren Abholservice.
Einfach anrufen unter Telefon (07151) 56808-60, oder Download des Abhol-
auftrages unter www.rems.de → Kontakt → Kundendienstwerkstätten →
Abholauftrag.
Oder wenden Sie sich an eine andere autorisierte REMS Vertrags-Kunden-
dienstwerkstatt in Ihrer Nähe.
9. Teileverzeichnisse
Teileverzeichnisse siehe www.rems.de → Downloads → Teileverzeichnisse.
Translation of the Original Instruction Manual
Fig. 1 – 9:
Fig. 1: View of inputs with operating panel and PRCD
Fig. 2: Operating panel of the input and control unit
Fig. 3: Connection to the water supply/installation
Fig. 4: View of outputs
Fig. 5: Flushing heating system/heating circuits
Fig. 6: Volume in l/m of different pipes
Fig. 7: Disinfection and cleaning unit
Fig. 8: Connecting hose compressor/water connections
Fig. 9: Printer
1 Fault current circuit breaker PRCD
2 RESET button
3 TEST button
4 On/Off button
5 Control lamp
6 Screen (LCD)
7 "?" button
8 Arrow buttons ↑ ↓
9 Enter button
10 Esc button
11 Arrow buttons ← →
12 Fine filter
13 Suction/pressure hose
14 Flush supply
15 Flush drain
16 Disinfection and cleaning unit supply
17 Pressure limiting valve
18 Non-return valve
19 Disinfection and cleaning unit drain
20 Flow head
21 Bottle (container) with dosing solution
22 Output pressure test with compressed air, compressed air pump
23 Compressed air hose
24 Supply pressure test with water
25 Drain pressure test with water
26 High-pressure hose
27 Water drain pressure relief
28 Compressed air tools connection
29 Emergency stop button compressor
30 Pressure gauge compressed air tank
31 Compressed air tools pressure setting
32 Compressed air tools pressure gauge
33 USB connection
34 Condensation screw plug
35 Compressed air tank
36 Operating panel
37 Protective hood
38 Connection hose compressor/water connections
39 Control lamp PRCD
40 Printer
41 LED
42 Paper tray rail
43 On/Off button, paper feed
44 Charger
45 USB lead
General Power Tool Safety Warnings
WARNING
Read all the safety notes, instructions, illustrations and technical data which
come with this power tool. Failure to heed the following instructions can lead to
electric shock, fire and/or severe injuries.
Keep all safety notes and instructions for the future.
The term "power tool" used in the safety notes refers to mains operated power tools
(with power cable).
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmod­
ified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not misuse the connecting cable to carry or hang up the power tool or
to pull the plug out of the socket. Keep the connecting cable away from
eng
15