Boston Scientific Precision SC-1110 Serie Manual De Uso página 50

Precision™ System Clinician Manual
Note: • The Remote Control will remain CP
Ready for up to 15 minutes with no
activity.
• All buttons are active during CP
Ready and pressing any button
returns the Remote Control to the
Level screen.
• Stimulation may be turned on or off
in CP Ready state.
• Whenever the Remote Control is
re-activated from idle mode the
display will default to the Level
screen.
The Clinician Programmer can communicate
with either an External Trial Stimulator or
an IPG.
Arrange for the patient to be seated within
two feet of the Remote Control to ensure
an adequate communication link from the
programmer to the Stimulator.
For instructions on how to use the Clinician
Programmer with the Bionic Navigator
software to program the IPG and transfer
programs to the Remote Control, see the
Bionic Navigator Software Guide.
Clinician Manual
9055959-008 Rev A 48 of 327
Selection #2 – Impedances
When the "Impedances" option is selected
from the Clinician Options menu, the Remote
Control will measure impedances at each
contact on the lead(s). This will take about
10 seconds.
Note: During this measurement the serial
number of the Stimulator will be
displayed on the screen.