The Operating Philosophy; The Keypad; Direct Access Menu Buttons (Row 1); Working Buttons (Row 2) - Multiplex ROYALevo 7 Manual De Instrucciones

11.The operating philosophy

The ROYALevo7 features a new, ultra-simple operating
philosophy, as already adopted successfully for the
ROYALevo 9 and 12. The great advantage of the system
is the clear, logically arranged list-based menu structure.
The menus and settings are displayed in plain language
(a choice of several) for ease of understanding. The sys-
tem is controlled using the keypad and the two 3D digi-
adjustors.
The direct access menu buttons take you straight to the
clearly laid-out and logically sub-divided main menus.
Menu points can then be quickly and easily selected
and values changed using the 3D digi-adjustors (rotate
= select / change, press = confirm "ENTER"), or alterna-
tively using UP / DOWN ("L " / "M ") and the "ENTER"
button.

11.1. The keypad

11.1.1.

Direct access menu buttons (row 1)

The keypad is used to program (more accurately: adjust
the settings of) the transmitter.
The six buttons in the top row are the direct access
menu buttons. Pressing a button takes you directly to
one of the six main menus, each of which leads to the
associated sub-menus. The buttons are marked with
corresponding symbols:
L
SETUP (Configuration) (
Transmitter
Define free mixer A/B
Assignment
Training
User
H
TRANSMITTER CONTROL (
Access to the individual transmitter control set-
up menus. Only those controls are displayed
which are used in the current model.
( dynamic menu).
G
MIXER ( 15.)
Access to the individual mixer menus. Only
those mixers are displayed which are used in
the current model.
( dynamic menu).
K
SERVO ( 16.)
Servo calibration
Servo assignment
Servo monitor
Servo test run
A
TIMER (stopwatch) (
13.)
14.)
17.)
Page 21
ROYAL evo 7 - Instructions
I
MEMORY ( 18.)
Model select (change memory)
Model copy
Model erase
Flight phase management
Model characteristics
Set up new model
11.1.2.

Working buttons (row 2)

The five working buttons have different functions in the
status displays and the menus; they are shown in the
following tables.
Button Function
in the status display
Digi-adjustor assign button
Open / block the pos-
sibility of changing an
assigned value. Af-
fects both 3D digi-
adjustors together.
REV/CLR Reverse / Clear
All timers are reset to
the pre-set alarm
time
ENTER
No function
UP / DOWN buttons
up down
Switch between
status displays
Function
in a menu
Select a value which
is to be altered using
one of the two 3D
digi-adjustors.
Change prefix of val-
ues (reverse), switch
function off
ENTER
Activate selection,
accept values, leave
select process
Select menu points
and parameters, alter
values