Main Menu Setup L; Sub-Menu: Transmitter; Parameter: Sounds; Parameter: Battery Alarm - Multiplex ROYALevo 7 Manual De Instrucciones

ROYAL evo 7

Main menu Setup L

13.
This main menu primarily contains settings which affect
the transmitter generally.
13.1.
13.2.
13.3.
13.4.
13.5.
This symbol indicates global settings which affect
the characteristics of the transmitter overall.
I Some settings only apply to the selected model;
they are indicated by the model memory symbol.

Sub-menu: Transmitter

13.1.

Parameter: Sounds

13.1.1.
global effect
The various beeps from the integral piezo sounder are
divided into five priorities. Here you can set the priority
for the audible warnings.
Setting Audible signal
1. Batt only Battery alarm, error warning
2. Trim+Batt Trim, battery alarm, error warning
Trim, timer, battery alarm, error
3. Tr+Ti+Ba
warning
Digi-adjustor, keypad, trim, timer,
4. Init OFF
battery alarm, error warning
All sounds:
Power-on tune, digi-adjustor, key-
5. All
pad, trim, timer, battery alarm, error
warning

Parameter: Battery Alarm

13.1.2.
global effect
Range 6.70 to 7.5 V (0.01V increments)
Default 6.9 V
The battery alarm is designed to alert you when the re-
maining charge is only sufficient for a certain residual
operating time.
!
The lower the threshold you set,
the shorter the remaining residual time.
The residual operating time varies very greatly accord-
ing to the condition of the battery (maintenance,
charge procedure, storage, age, number of charge cy-
cles), as well as the set warning threshold. For this rea-
son it is really essential that you carry out a test to estab-
lish how much residual time remains with the warning
threshold you have set.
This can be done by switching on the transmitter with
the aerial fully extended and an RF module installed
(crystal RF module: crystal fitted). It is not necessary to
move the sticks. Set the alarm threshold to the desired
value, and set status display 1 or 2 to show the battery
voltage.
We recommend an alarm threshold no lower than
6.90 Volts.
Now record the (warning) time from the first alarm
sound until the battery falls to the minimum operating
voltage of 6.7 Volts.
!
6.7 V is the minimum permissible operating vol-
tage.
At around 6.3 V the transmitter switches itself
off automatically!
!
Caution!
The warning time is very much shorter if the
battery is already discharged to a low level
when you switch the transmitter on.

Parameter: Battery charge

13.1.3.
global effect
In addition to the battery alarm (transmitter battery
voltage monitor), the ROYALevo 7 features a current
monitor. It "counts" the current which flows into the
battery when on charge, the current which flows out
when the unit is in use, and also takes into account the
self-discharge rate. From this information it calculates
the battery's residual charge, which is displayed in
status display 3.
You can correct the calculated battery charge within the
range 0 mAh to 2500 mAh in 50 mAh increments, e.g. if
you had removed the battery for charging. The battery
charge is automatically reset to 0 mAh if battery voltage
falls below 6.5 Volts.
Pressing the "REV/CLR" button erases the displayed bat-
tery charge; pressing it a second time resets the battery
charge to 1500 mAh.
Please read the section Transmitter battery / charging
( 8.5.) for more information on "battery manage-
ment".

Parameter: Contrast

13.1.4.
global effect
Range -8 ... 0 ... 8
Default 0
Altering this parameter changes the contrast of the
screen to suit the ambient temperature conditions.
Page 26