Stryker 1288010000 Manual Del Usuario página 17

Digital
Optional
* On some monitors, S-VHS inputs may be labeled Y/C.
** The DVI connectors can also output analog SXGA signals through a DVI-I to VGA adapter.
Use the cables and outputs described above to connect the 1288 HD to other operating-room
equipment. Wiring Diagrams 1-3 describe typical set-ups.
• If desired, connect any remote outputs using the remote cables supplied with the
1288 HD Camera. (See Wiring Diagram 2.) Devices connected to the remote outputs
of the 1288 HD Camera can be operated using the P buttons on the camera head
and/or console. See the "Operation Instructions" section of this manual for details.
• If desired, connect the SIDNE® interface as well. (See Wiring Diagram 2.)
**DVI-I1 DVI
**DVI-I2 DVI
Displayport Displayport
DVI over Fiber (× 4)
optical Fiber
29 pin (push-only connectors,
with two tightening knobs)
29 pin (push-only connectors,
with
two tightening knobs)
20 pin Displayport
(auto-locking connector)
Lucent connector fiber
(× 4) (push only)
13