SATA AE1032H Manual De Instrucciones página 48

AE1032H AE1032H
WARNING
The installation site must be chosen in strict compliance with the relevant regulations regarding Safety in the
workplace.
IMPORTANT: for correct, safe use of the equipment, users must ensure a lighting level
CAUTION
If the machine is installed outdoors, it must be properly sheltered under a roof.
WARNING
The floor must be able to withstand a load equal to the sum of the weight of the equipment itself and
the maximum payload, bearing in mind the support surface area and eventual anchor fixtures used.
Install the tyre changer in the chosen work position, complying with the minimum clearances shown in
fig. 3.
The machine must be placed on a horizontal surface, preferably concrete or tiled floor. Do not install on
unstable or damaged surfaces.
The surface on which the machine rests must withstand the loads transmitted during operation. The
surface must have a load-carrying capacity of at least 500 kg/m2.
- Relative humidity 30% - 95% without condensation.
- Temperature 0°C - 50°C.
WARNING
Use of the machine in a potentially explosive atmosphere is not permitted.
( Fig. 3 )
48
- 03 -
EN EN DE DE RU RU KO KO PT PT JA JA ES ES