SATA AE1032H Manual De Instrucciones página 66

- Information
Any noise heard when the tool head engages with the tyre is normal. The noise is caused by the mechanical return of
the tool and not because the tool has hit the rim. Even if the tool does touch the rim as the tyre is engaged, this will
not damage the rim in any way. The pressure applied is very low. If you wish to prevent this noise, simply press the bead
breaker disc harder against the bead when picking it up.
9. WHEEL FOR CARS, OFF-ROAD AND LIGHT COM¬MERCIAL VEHICLES.
WARNING
Bead breaking is well known to be a dan¬gerous operation. It must be carried out in accordance with the
instructions below.
Wheel for cars, off-road and light com¬mercial vehicles.
WARNING
Read the "PRACTICAL HINTS, ADVICE AND USEFUL INFORMATION" section above with great care.
WARNING
Before starting the demounting operation, make sure the machine is set with the column tilted from the
rear and the dual-position bead breaker support is not locked.
1. Wheel loading (fig. 14-14a)
AE1032H
( Fig. 14 )
( Fig. 14a )
66
- 03 -
EN DE RU KO PT JA ES