Technical Specifications; Accessories; Standard Accessories; Optional Accessories - Ravaglioli G96 Serie Manual De Instrucciones

1.1.3.2 Control post (Models G98E.13-G102.15)
Small control post (Fig.21) containing:
•
A Two-position Manipulator: open/close chucking table
•
B Two-position Manipulator: clockwise/anticlockwise tool rotation
•
C Four-position Manipulator: right/left: slide right/left shifting
Up/down: chucking table arm up/down shifting
•
D Four-position Manipulator: right/left: bead breaker arm right/left shifting
Up/down: bead breaker arm up/down shifting
•
E single/double speed selector
•
F rotation pedals: right pedal for clockwise rotation, left pedal for anticlockwise rotation
1.2

Technical specifications

Figures 22, 23, 24, 25, 26A, 26B, 26C show the overall dimensions of the G96, G97/52, G97.11, G98.13,
G98E.13, G102.15 and G102.15M machines. Tab. 2 shows their main technical specifications and their operation
data.
Tab. 1 shows the size and weight of the packing material for machine shipment.
Electrical power: the machine must be powered with three-phase electrical power featuring the specifications
shown on the plate located beside the power cable.
Noise level: the acoustic level of the machines referred to is lower than 70 dB(A) when running.
1.3

Accessories

1.3.1 Standard accessories

With reference to Fig. 27:
On all models:
• Lever 1: to raise the tyre bead.
• Fitting clamp 2: For holding the bead and sheet-metal rim together when fitting a tyre.

1.3.2 Optional accessories

With reference to Fig. 28:
On all models:
• Bead clamp 5 for aluminum wheels
Only on G96 models
• Roller 2 for tubeless tyres (as alternative to disc tool)
• Clamp holder 4 for alloy wheel rims
(For the accessory specifications see spare parts table 13)
Only on G97 models
• Roller 2 for tubeless tyres (as alternative to disc tool)
• Dead clamp 3 for large wheels
• Clamp holder 4 for alloy wheel rims
(For the accessory specifications see spare parts table 13)
• Set of (4) extensions 6:
to mount on chucking table clamps for higher holding pressure.
Only on G98-G102 models
• Clamp 1 for alloy wheel rims
• Roller 2 for tubeless tyres (as alternative to disc tool)
• Dead clamp 3 for large wheels
(For the accessory specifications see spare parts table 10)
• Set of (4) extensions 7:
to mount on chucking table clamps for higher holding pressure.
1465-M001-3
G90A6
G96A2
G97A1
G90A2
G90A3
G97A1
G97A2
G98A2
G90A2
G90A3
G98A3
GB
29