Hazards Deriving From Gas Springs Applied To The Plexiglass Lid; Hazards Deriving From Gas Used In The Machines Equipped With The Gas Option; Hazards Deriving From The Presence Of Heating Elements (Sealing Bars); Machine Maintenance, Service And Repairs - Orved Bright Serie Manual De Uso

• Only qualified personnel can operate on the power supply system and access live parts.
• Perform regular inspections of the electrical system of the machine (these are only to be performed by qualified per-
sonnel).
• Remove and/or immediately replace loose connections or burnt wires (only qualified personnel must replace these
parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace this part.
• Use only suitable plugs and sockets that comply with the electrical specifications stipulated on the identification plate
of the machine.
• Do not insert objects in the vents of the machine: risk of electric shock!
• It is strictly prohibited to use running water, water jets and/or vapour in the machine installation area: risk of electric
shock!

2.4.5 hAZARDS DERIVING FROM GAS SPRINGS APPlIED TO ThE PlEXIGlASS lID

DANGER!
• Do not open, cut or damage the gas springs of the lid. These devices are loaded at a pressure of about 180 bar.
• The gas springs must be discharged before disposing of the machine. Request instructions regarding disposal.

2.4.6 hAZARDS DERIVING FROM GAS USED IN ThE MAChINES EQUIPPED WITh ThE GAS OPTION

DANGER!
• Use only nitrogen (N ), carbon dioxide (CO
2
• Risk of explosion! Do not use oxygen (O
other explosive or flammable gases.
• Strictly comply with the gas manufacturer's instructions for proper use of the gas cylinders and gas pressure reducers!

2.4.7 hAZARDS DERIVING FROM ThE PRESENCE OF hEATING ElEMENTS (SEAlING BARS)

DANGER!
• Risk of scalding: do not touch the sealing bar at the end of the work cycle.
2.4.8 MAChINE MAINTENANCE, SERvICE AND REPAIRS
DANGER!
• Remove the plug from the socket before each intervention.
• Perform all machine maintenance and servicing as scheduled.
• Any damage must only be repaired by qualified personnel.
Rev. 05 - 04/2018 - Cod. 1500458 - Instruction manual for vacuum chamber packaging machines with digital control panel "Serie Bright"
GENERAl SAFETy STANDARDS AND ACCIDENT PREVENTION
), nitrogen and carbon dioxide mixtures (N
2
), other explosive or flammable gases, gas mixtures containing oxygen (O
2
-CO ) or other inert gas mixtures.
2 2
) or
2
13