Naming Custom User Program; Programming And Operation: Vacuum Packing Bags; Programming - Orved Bright Serie Manual De Uso

OPERATION
Press the PUMP button to access the jars menu. Select the most suitable Jars cycle and press SEL.
POSITION PROGRAM NAME
33°
jARS - NO STOP
34°
jARS - SENSOR
35°
jARS - MIN
36°
jARS - MED
37°
jARS - MAX
38°
jARS - EXTREME
39°
jARS - DEGAS

9.3.1 NAMING CUSTOM USER PROGRAM

It's possible to assign to each user program (1 - 20) a name, consisting of up to 6 letters. Proceed as follows:
FhASE DESCRIPTION
1
Select one of the 20 programs available.
2 Enter programming. (the first digit of the lower display starts to flash).
3
Select a letter.
4
Confirm the letter and access the next to be programmed.
5
Confirm.
9.4 PROGRAMMING AND OPERATION:
VACUUM PACKING BAGS
Read Chapters 6.2 and 8.1 carefully

9.4.1 PROGRAMMING

FhASE DESCRIPTION
1
Select one of the 20 programs available.
2
Select the function to be programmed (vacuum – gas – sealing – softair – data
clock)
3
Enter programming. (the value of the function starts to flash).
4
Change the value (minimum/maximum values: see table § 9.1.2).
A number of LEDs proportional to the value turn on / off.
5
Confirm the value or access the next function to be programmed by pressing
the "SEl" button.
6 Proceed with other functions to be changed and each time confirm with the
"PROG" button.
46
Rev. 05 - 04/2018 - Cod. 1500458 - Instruction manual for vacuum chamber packaging machines with digital control panel "Serie Bright"
PROGRAM TyPE MESSAGE ON ThE DISPlAy PROGRAMMABlE
FOR CONTAINERS
JARS
WElDING TIME
VACUUM-PAUSE
NO
KEy
KEy