Handling And Unpacking; Unpacking - Orved Bright Serie Manual De Uso

hANDlING AND UNPACKING

4. hANDlING AND UNPACKING
WARNING!
• Pay particular attention to staples, nails, rivets, sharp edges or anything else that could be a potential
hazard on the packaging. Upon receiving the package, the Customer must verify its integrity, duly
reporting any anomalies, missing items or evident damage to the carrier or transport personnel. In any case, this
report must be made before any other handling or unpacking operation is implemented.
• Any damage on the packaging could result in the appliance or its components being damaged. If in doubt
about the actual integrity of the appliance following transport, before any other operation, ask your dealer or
ORVED S.p.A. for information.
• The packed appliance must be stored in a protected place, which is dry, covered and not exposed to weathering.
The area in question must have a temperature range of 5°C to 40°C and a relative humidity value that does not
exceed 80%. Water and water vapour must be kept at a distance from the installation or storage area.

4.1 UNPACKING

• After having removed the packaging, check the integrity of the appliance. If in doubt, do not use the machine and
contact the dealer immediately.
• Store the Velcro strap
• It is recommended to store the packaging intact for any future handling or storage operations.
• Comply with that described in Chapter 3 for disposal and safety of the packaging material.
18
Rev. 05 - 04/2018 - Cod. 1500458 - Instruction manual for vacuum chamber packaging machines with digital control panel "Serie Bright"
to tie the power cable to the relative support.
A
A