Safety Device That Prevents The Sealing Bar From Overheating; Safety Device That Prevents The Vacuum Pump From Overheating; Main Switch; Lid Switch - Orved Bright Serie Manual De Uso

GENERAl SAFETy STANDARDS AND ACCIDENT PREVENTION

2.5.2 SAFETy DEVICE ThAT PREVENTS ThE SEAlING BAR FROM OVERhEATING

Your vacuum packing machine is equipped with a safety system, which eliminates the risk of overheating (and potential
fire hazard) resulting from a defect or malfunction in the power supply of the sealing bar, by means of special tempe-
rature sensors.

2.5.3 SAFETy DEVICE ThAT PREVENTS ThE VACUUM PUMP FROM OVERhEATING

Your vacuum packing machine is equipped with a safety system that eliminates the risk of the pump motor overheating,
which could be triggered by galling or a defect, by means of special temperature sensors placed on the motor winding.

2.5.4 MAIN SWITCh

The power supply of the appliance can be disconnected from the main switch, which can also be used as an emergency
switch.
ThREE-PhASE VERSIONS SINGlE-PhASE VERSIONS

2.5.5 lID SWITCh

The lid switch eliminates the risk of the sealing bars overheating accidentally, resulting from a malfunction or defect,
when the lid is open.

2.5.6 SAFETy FUSES ThAT PREVENT OVERlOADS AND ShORT-CIRCUITS

The machine has safety fuses to prevent overloads and short-circuits.

2.5.7 ThERMAl PROTECTORS OF ThE SEAlING TRANSFORMER

The sealing transformer has a self-resetting thermal protector, which is triggered if the transformer overheats.
Since the thermal protector is self-reset, simply wait for the component to cool down before continuing to use the machine.
2.5.8 FAN COvER FOR ThE vACUUM PUMP
The vacuum pump has a safety cover that prevents contact with the cooling fan.

2.5.9 lOCKING ROD OF ThE CASING

The locking rod prevents the machine body from closing accidentally while maintenance is being performed.
15
Rev. 05 - 04/2018 - Cod. 1500458 - Instruction manual for vacuum chamber packaging machines with digital control panel "Serie Bright"