Description Of Controls And Instruments - ANTEO FUTURA F3 RE Uso Y Mantenimiento

DESCRIPTION OF CONTROLS AND INSTRUMENTS

Ref. Description
C1
Control cir cuit switch
C2
Pilot lights platform not in rest position
C3 Key-operated switch
Selector switch enabling the auxiliary
C4
controls/console controls
Platform movement lever
C5
(it is enabled only if C4 is turned to the right)
Stabilizers lift ing/lower ing selec to
C7
(optional) r
P1 Tail-lift slid ing out push but ton
P2
Proximity cutout push but ton
P3 Tail-lift slid ing back push but ton
A
Fuse box
B
Green pilot light "POWER ON"
Socket for connection of the emergency
C
control (optional).
72
DESCRIPTION OF CONTROLS AND INSTRUMENTS
Ref. Description
C1
Control cir cuit switch
C2 Pilot lights platform not in rest position
C3
Key-operated switch
Selector switch enabling the auxiliary
C4
controls/console controls
Platform movement lever
C5
(it is enabled only if C4 is turned to the right)
Stabilizers lift ing/lower ing selec to
C7
(optional) r
P1 Tail-lift slid ing out push but ton
P2 Proximity cutout push but ton
P3
Tail-lift slid ing back push but ton
A Fuse box
B
Green pilot light "POWER ON"
Socket for connection of the emergency
C
control (optional).
72
Use/Function
on the console in the vehicle cab (fig. 1)
it con nects/dis con nects the con trol cir cuit of the Tail-lift (and the pilot lights (a) turn on) (Optional)
when they are on they indicate, the plat form is not at rest (Optional
on the main con sole (fig. 2)
it con nects/dis con nects the power supp ly of the Tail-lift
- when turned to the left it enables auxiliary controls - remote control, radio control or ultra-flat push-button panel according to the symbol on the plate.
- turned right, enables control (C5) (it must be kept turned right to enable such control)
- if in central position, no control is enabled
- when it is actuated to the left, the plat form rotates downwards
- when it is actuated to the right, the plat form rotates up wards
For countries with left-hand drive:
- when it is actuated downwards, the plat form lowers
- when it is actuated upwards, the plat form lifts
For countries with right-hand drive:
- when turned on to the right the platform rotates downward.
- when turned on to the left the platform rotates upward.
- turned to the left, the stabilizers lower
- turned to the right, the stabilizers lift
when operated, the tail-lift is projected
it is enabled when the tail-lift is placed in one of the three posi tions deter mined by the proximity (full slid ing back, opera tion, full slid ing
out); (P1) or (P3) enabled it al lows to con tinue the trans la tion
when operated, the tail-lift ret racts
it con tains the fuse in stalled in order to protect the electric sys tem. Fuse 15 A Ø 5x 22
on when voltage is live [(C3) in pos. ON] and the temperature value of the electric motor is normal. A thermal probe detects the electric
motor overheating and cuts off its power supply. Such condition is signalled when the pilot light turns off.
this socket is for connection of the emergency control and ONLY for CLOSING the tail lift if the main console fails.
Use/Function
on the console in the vehicle cab (fig. 1)
it con nects/dis con nects the con trol cir cuit of the Tail-lift (and the pilot lights (a) turn on) (Optional)
when they are on they indicate, the plat form is not at rest (Optional
on the main con sole (fig. 2)
it con nects/dis con nects the power supp ly of the Tail-lift
- when turned to the left it enables auxiliary controls - remote control, radio control or ultra-flat push-button panel according to the symbol on the plate.
- turned right, enables control (C5) (it must be kept turned right to enable such control)
- if in central position, no control is enabled
- when it is actuated to the left, the plat form rotates downwards
- when it is actuated to the right, the plat form rotates up wards
For countries with left-hand drive:
- when it is actuated downwards, the plat form lowers
- when it is actuated upwards, the plat form lifts
For countries with right-hand drive:
- when turned on to the right the platform rotates downward.
- when turned on to the left the platform rotates upward.
- turned to the left, the stabilizers lower
- turned to the right, the stabilizers lift
when operated, the tail-lift is projected
it is enabled when the tail-lift is placed in one of the three posi tions deter mined by the proximity (full slid ing back, opera tion, full slid ing
out); (P1) or (P3) enabled it al lows to con tinue the trans la tion
when operated, the tail-lift ret racts
it con tains the fuse in stalled in order to protect the electric sys tem. Fuse 15 A Ø 5x 22
on when voltage is live [(C3) in pos. ON] and the temperature value of the electric motor is normal. A thermal probe detects the electric
motor overheating and cuts off its power supply. Such condition is signalled when the pilot light turns off.
this socket is for connection of the emergency control and ONLY for CLOSING the tail lift if the main console fails.
En
En