Ozone Filter Mount; Ozone Filter Mount - HP LaserJet II Serie Manual De Instrucciones

HP 33440/HP 33449 COMBINED SERVICE MANUAL
6-3. M AiNBODYCOMPONENTS
OZONE FILTER MOUNT
The Ozone Filter is contained in the Ozone Filter Mount shown in FiWre 6-14. The entire AC
Power Module does not need to be removed to remove the Ozone Filter, but the fan duct may
need to be removed in the HP 33440 (see note below). On the HP 33449 and later or modified
models of the HP 33440, follow the directions on the Ozone Filter Access Door for filter removal.
To remove the Ozone Fflter Mount in both printers:
1. Remove the Main Body Covers.
2. Remove the screws (2) securing the filter mount and lift straight out.
3. Slide the filter out of its mount.
Note
A user-replaceable Ozone Filter is standard in the HP 33449 and mn be intiled
o
as an o~tion in the HP 33440. See Service Note 33440-7.
.
warning
When replacing the Ozone Filter Mount, ensure that the circuit breaker reset
B
@
button is positioned in the center of the cover access hole. Failure to position
the Ozone Filter Mount properly may cause a safety issue.
Ozone,filter I —
%rews
6-19