HP LaserJet II Serie Manual De Instrucciones página 56

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Configuration Menu Settings
The Configuration Menu for both printers includes the following items:
Symbol Set (HP 33440 only).
Auto Continue.
w Interface Parameters.
The HP 33449 Cotilguration Menu includes the following additiond items and omits Symbol Set
which is in the Printing Menu:
Resolution Enhancement.
Page Protection.
The Configuration Menu is used to program the printer for communication with a specific
computer. To enter the Configuration Menu, press the [=] key until:
HP 33440: SYMBOL SET= appears in the display (about 5 seconds).
HP 33449: AUTO CONT=appears in the display (about 5 seconds).
Table 3-4 (combined HP 33440 and HP 33449 Configuration Menu items) and Table 3-5
(HP 33449 additiond Configuration Menu items) can be used as quick reference guides to
Configuration Menu items. They describe menu items used primarily during initial setup and
configuration. (The "Printer Displays" column shows the factory default settings.)
Table 3-4. HP 33440 and HP 33449 Configuration Menu Items
~
33440: I/O= SERIAL*
~ 3344g: I/O=PARALLEL*
Interface SERIAL=RS-232* 3
Type
(HP 33449 only)
Baud BAUD RATE= 9 600*3
Rate
XON
ROBUST X ON=ON*3
Disposition
DTR DTRPOLARITY=HI*4
Polarity
Q
;
step
or
scroU
through
items
SEW or PARALLEL
=
(or OPTION&)5
=Co'nue
HI or LO
1. Symbol Set is in Printing Menu for the HP 33449.
2. An ~terisk (*) following an item indicates that the selection is saved.
3. Only if SER~ is selected.
4. o~y if SERN and W-232 are selected.
5. ody if an optional 1/0 interface is instiled.
3-16