HP LaserJet II Serie Manual De Instrucciones página 179

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Table 7-2. Printer Messages (continued)
*SAGE .
41
ERROR
43
ERROR
50 SERWCE
51
ERROR
52
ERROR
53 ERROR
(HP 33440
O~y)
SWA~ON
DESCR~ED AND/OR AC~ON REQ~RED
Indicates that a temporary error occurred in the printed page (see
Table 7-20). If this error occurs, press the (-] key and
the printer will repeat the page. Refer to Table 7-20 ("41 ERROR
Checks") in the "5 I ERROR M essage" section if the error persists.
Note:
This error most frequently occurs when a Beam Detect
Error occurs. If the printer mnnot correct the error condition after
tio seconds, a Beam Detect Mfinction (5i ERROR) will occur.
Indimtes a communications problem has occurred between the
Interface/Formatier PCA and the optional interface. Press the
[-] key to resume printing. Reseat the Optional 1/0 PCA.
If the error persists, refer to the documentation for the optional
interface.
Indicates a communications problem has occurred be~een the
Interface/Formatter PCA and the optional interface. If the error
persists, refer to the documentation for the Optional 1/0 PCA.
Power off the printer for a minimum of 10 minutes. If the problem
continues, refer to the "50 SERVICE Fuser Malfunction" section.
(Table 7-19)
Indicates loss of laser beam for over 2 seconds. Refer to the "51
ERROR Message" section. (Table 7-21)
Indicates smnner motor unable to maintain proper speed. Refer to
the "52 ERROR Smnner Malfunction" section. (Table 7-22)
The 53 ERROR indimtes that the optional memory instiled in
the printer is NOT compatible with the Interface PCA. Use HP
memory only.
7-15