Identification - HP LaserJet II Serie Manual De Instrucciones

HP 33440/HP 33449 COMBINED SERVICE MANUAL
1"2. IDENTIFICATION
The re@atory labels, lomted behind the Face-Up (Rear) output Tray, are different for the HP
33440 and HP 33449. For the HP 33440, the regulatory label contins both the model and serial
number. On the HP 33449, the model and serial number are located on a separate label just
below the power connector on the right side panel of the Main Body Covers (see Figure l-l). Note
that this portion of the right side panel is removable on the HP 33449. (Care must be taken to
ensure the printer's cover, with its serial number, stays with the printer.) The model number is
an alphanumeric such as HP 33440A or 33449AB.
For both printers, the serial number consisti of the following sequence: a four digit prefk, a letier,
and a five digit suffk (for emple: 0000JOOOOO). The prefk is used to indicate year and week
of manufacture. The letter designates the country in which the printer was manufactured ("J"
indicates Japan, for e~mple). The suffii is a sequential number incremented for each printer
produced.
For both printers, the power rating is lomted on a plate nefi to the Power Switch (see Figure l-l).
FACE-UP OWPUT
TWY @EGUWTORY
UBEL BEHIND)
R
WER RAnNG
E:: 3344?A 3;::0000
1
1
WT- - 1OO-W5
MODEL AND SERIAL No. PLATE
Hz
50-w
WS.
7.6
(HP 33449 ONLW
HP 33W REGUMTORY MBEL
Figure 1-1. Printer identification and Power Rating
1-5