Understanding The Font Printout - HP LaserJet II Serie Manual De Instrucciones

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Understanding the Font Printout
Font printouti for the HP 33440 and HP 33449 are different although the printout procedure is
basidly the same:
1. Take the printer off fine, then briefly press the
[PRINT FONTS/TEST)
key.
2.
The message, 06 FONTPRINTOUT, will appear and several pages W be printed. (HP 33449
only thirty seconds may elapse between pages to allow time for the generation of any salable
characters.)
HP 33440
The HP 33440 printout displays sk columns of information numbered items below refer to
Figure 3-5:
1.
2.
3.
4.
5.
6.
Font ID is the number the printer uses to select internal fonts, catiridge fonts, or downloadable
SORfronts from the Control Panel. (Note: this is not a sofi font ID number used by sotiare.)
The letier preceding the font number indicates the lomtion of the font.
s = Permanent soft font residing in printer memory.
R = Fonts in the right font cartridge.
L
= Fonts in the lefi font cartridge.
I = Internal printer fonts.
Name is the name of the typeface (e.g., COURIER).
Pitch shows the characters-per-inch of a f~ed pitch font or "PS" for proportionally spaced
fen%.
Point Size refers to the character's height (72 points per inch, 28.3 per centimeter).
Symbol Set refers to the specific collection of characters and symbols associated with a font
(see Table 3-6).
Print Sample shows what the font characters look like.
3-21