Feed Guide Assembly - HP LaserJet II Serie Manual De Instrucciones

HP 33440/HP 33449 COMBINED SERVICE MANUAL
FEED GUIDE ASSEMBLY
1. ,Open the Top Cover Assembly.
2. Remove the Gear Cover on the right side of the Feed Guide Assembly.
3. Remove the Main Motor Drive Assembly gear cover.
4. Remove the screws (4) securing the Feed Guide Assembly (see Figure 6-33) and ~ it out of the
printer.
For replacement the Fusing Assembly must be removed in order to position the Feed Guide
Assembly ground tib on top of the ground spring plate as shown in Figure 6-34. The Feed Guide
Assembly must dso fit over the two Wide pins adjacent to the ~o screws nearest the front of the
printer.
r
Gesr
tiver
Screw — — .*rew .-.-. .
Ar
------
—-
!
Feed Guide
-mbly
}
I I
6 /
I /
Figure 6-33. Feed Guide Assembly
6-38