HP LaserJet II Serie Manual De Instrucciones página 63

HP 33440/HP 33449 COMBINED SERVICE MANUAL
HP 33449
The HP 33449 printout displays 11 columns of information in the iodized language. Numbered
items below refer to Figure 3-6:
1.
Font #is the number the printer uses to
select internal fonts,
cartridge fonts, or downloadable
sofi fronts from the Control Panel. (Note: this is not a soft font ID number used by sotiare.)
The letier preceding the font number indicates the location of the font.
s = Permanent soft font, residing in printer memory.
R = Fonti in the right font cartridge.
L = Fonti in the left font cartridge.
I = Internal printer fonti.
Note
For the HP 33440, Font ID is the equivalent of Font # for the HP 33449.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Font ID is an ~ number assigned only to permanent soft fonts downloaded from the host
system and selected by software.
Symbol Set refers to the specific co~ection of characters and symbols associated with a font.
Internal and cartridge salable fonts will only be shown in the symbol set selected on the
Control Panel. (See Table 3-7).
fi/PS indimtes whether the font has fked or proportional spacing (F or P).
Pitch (cpi) shows the characters-per-inch of a fried pitch font. (If the font is a salable,
fried-spaced font, "Sale" will appear in this column.)
Point Size refers to the character's height (72 points per inch, 28.3 per centimeter). (If the
font is a salable, proportional-spaced font, "Sale" will appear in this column.)
Style indicates whether the font is upright or itiic.
Stroke Weight is a font treatment such as medium, bold, light, or black.
Name or ~eface is the name of the typeface.
",'
Defadt Orient indicates whether the font defaults to either portrait or landscape orientation.
(Note that the HP 33449 printer, untike the HP 33440, can rotate fonts to the orientation
selected by the sotiare, even if the font is not resident in the printer in that orientation.)
Fonts produced from salable typefaces are only listed in the portrait orientation.
Print Sample and Esmpe Sequence.
Print sample shows what the characters look like.
Escape sequence is an actual printer command sequence used to select the designated font.
3-23