HP LaserJet II Serie Manual De Instrucciones página 35

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Table 2-2. Paper Specifications
Ash Content ]Not to exceed 10%.
Basis Weight
160
to
135
g/m2
(16 to 36
lb.).
Brightness
]83%
minimum.
Ctiper
13.0 to 7.0 roils (0.076
to 0.18 mm).
Furnish 1100% chemid wood pulp and/or cotton fiber.
Curl Ream: mat within 0.3" (8 mm).
Printed: Flat within 0.8" (20 mm).
Cut Edge Conditions ICut with sharp blades with no tisible fray.
ElectriA Surfaces
2.0
to
15 x 1010
ohms/sq. (conditioned @ 23° C & 50% RH),
Resistitity
Electrid Volume 1.2 to 15x 1011ohms x cm (conditioned @ 23°C and 50% RH).
Resistiti@
Finishing
\Cut sheet to within *0.031 in. (.79 mm) of nominal, corners 90° *0.2°.
Fusing Compatibility Must not scorch, melt, transfer material, or release haardous emissions
when heated to 200°C (392° F) for 0.1 second. Any pre-printed sheets
must use inks compatible with the fising process.
Grain lLong grain.
Moisture Content
4% to 6% by weight.
Opacity
85% minimum.
Packaging Polylaminated moisture-proof ream wrap.
Smoothness 160 to 250 (Sheffield). (The' rougher surfaces tend to degrade print
quality.)
Stiffness 1.6 to 7.5 machine direction.
0.6 to 3.5 cross direction (Taber).
W= Pick 12 minimum (Dennison).
2-7