Default Settings
Default Settings
HP 33440/HP
33449 COMBINED
SERVICE
MANUAL
and Restart Routines
Default printer settings are defined as those settings which will be used as a result of performing
a Control Panel 07 RESETor issuing a sotiare
reset (ECE) from the host system. The printers
originally ship with factory default settings as specified in Table 3-1. The factory default menu
settings till remain in effect until altered using the Control Panel menu selection.
Note that dl default Printing Menu setiings can be overridden using software commands and
will remain in effect until a subsequent printer reset (an 'CE or Control Panel 07 RESET)is
performed. These software commands do not alter the menu settings. Note also that sotiare
commands mnnot override Configuration Menu setiings.
Factory Default Settings
Factory defaults are permanently stored in the printer's ROM memory and mn be used to
set
Printing and Configuration Menu settings in ~.
The printer will use these default settings
until they are changed using the Control Panel or overridden by sending printer commands
through software. Both Printing and Configuration Menu settings can be returned to factory
default settings using the COLD RESET routine. Performing the RESET MENU routine will reset
dl Printing Menu settings to their factory defaults. Factory default setiings for both printers are
shown in Table 3-1.
Table 3-1. Factory Default Settings
Number of Copies (COPIES=)
01
1
Font Source (FONT SOURCE=)
I (Internal)
I (Internal)
Font Number (FONT NUMBER=)
o
0
Pitch (PITCH=)
n/a
PITCH 10,001
~oint Size (PT. SIZE=)
;oINT
sIzE 12.002
Paper Size (PAPER=)
n/a
LETTER/A43
IOrientation (ORIENTATION=)
In/a
IPORTMT
I
IForm (lines/page) (FORM=)
160
160/643
\
IManual Feed (MANUAL
FEED=)
10FF
10FF
I
ISymbol Set (SYM SET=)
1Row-8
IROW-8
I
IAuto Continue (AUTO CONT=)
10FF
10FF
I
11/0 (1/0=)
ISEW
IPMLEL
I
ISerial (S~RIAL=)4
In/a
IRS-232
I
IBaud Rate (BAUD RATE=)4
19600
19600
I
IRobust XON (ROBUST X ON=)4
10N
10N
I
3-11