HP LaserJet II Serie Manual De Instrucciones página 267

HP 33440/HP 33449 COMBINED SERVICE MANUAL
8-7. How To USE THE PARTS LISTS
The figures in this chapter illustrate the major subassemblies and their component patis of the HP
33440 and HP 33449 printers. Each figure is followed by a table which lists the item number for
each part given in the illustration, the associated part number for the item, the quantity required,
any special notes, and the description of that part. While looking for a part number, pay special
attention to the voltage listed in the description column to ensure that the part number is for the
correct type of machine.
Part numbers with no indicator in the Notes column are stocked and mn be ordered through
Hewlett-Packard's Support Material Organization (SMO). Parts marked with an "S" in the Notes
column are special order parts which can be "hotined" through SMO but have an eight-week lead
time. Parts that have no reference designator or part number are not field-replaceable and cannot
be ordered through SMO.
An dphabetid index referencing dl part numbers is included at the end of the chapter
(Section 8-3).
The following table identifies common hardware used in the HP 33440 and HP 33449 printers:
Table 8-O. Table 8-O. COMMON HARDWARE
L
@
%
Coated (black) pan-head Phillips Use platid screws.
machine screw.
(See below)
Plated (silver-colored) pan-head M3x6 -0515-1896
Phillips machine screw.
M3x8 -0515-1895
M4x6 -0515-1876
M4X8 -0515-1912
Coated (black) washer-head Phillips
M3x6 - M6-7300-609CN
machine screw.
M3x8 - ~6-7300-809CN
Plated (silver-colored) washer-head
M3x6 - ~9-0267-OOOCN
Phillips machine screw.
Coated (black) self-tipping Phillips
M3x6 - =4-7300-609CN
screw for plastic.
M4x1O - ~4-7401-009CN
Plated (brass-colored) Phillips ~9-0342-OOOCN
shoulder screw.
Plated (silver-colored) Phillips screw ~9-0389-OOOCN
with captive star washer.
8-3