Normas Atendidas - WEG CFW-09 Manual Del Usuario

INTERFACE
HOMBRE
MAQUINA (HMI) (HMI-CFW-09-LCD)
GRADO DE
PROTECCIÓN
(1) Disponible en los modelos  30 A / 220-230 V o  30 A / 380-480 V o 22 A / 500 -600 V o para todos los modelos de 500-690 V y 660-690 V

9.2.1 Normas Atendidas

GENERAL
EMC
MECHANICAL
08 teclas: Conecta, Desconecta, Incrementa, Decrementa,
Sentido de giro, JOG, Local/Remoto y Programación
Display de cristal líquido de 2 líneas x 16 columnas y display de LEDs (7
segmentos) con 4 dígitos
LEDs para indicación del sentido de giro y para indicación del modo de operación
HMI
(LOCAL/REMOTO)
ESTÁNDAR
Permite acceso/alteración de todos los parámetros
Precisión de las indicaciones:
- Corriente: 5 % de la corriente nominal
- Resolución velocidad: 1 rpm
Posibilidad de montaje externo, cables disponibles hasta 10 metros
NEMA1/IP20
Modelos 3.6 A a 240 A/380-480 V, 107 A a 211A/500-690 V y 100A a
179 A/660-690 V y todos los modelos 220-230 V y 500-600 V
Modelos 361 A a 600 A/380-480 V, 247 A a 472 A/500-690 V y 225 A a
PROTECTED
428 A/660-690 V
CHASSIS / IP20
UL508C - Power conversion equipment
UL840 - Insulation coordination including clearances and creepage distances for electrical
equipment
EN50178 - Electronic equipment for use in power installations
EN60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: the final assembler of the machine is responsible for installing:
- an emergency-stop device
- a supply disconnecting device.
EN60146 (IEC 146) - Semiconductor convertors
EN61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating
specifications for low voltage adjustable frequency AC power drive systems.
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard
including specific test methods
EN55011 - Limits and methods of measurement of radio disturbance characteristics of industrial,
scientific and medical (ISM) radio-frequency equipment
CISPR11 - Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic
disturbance characteristics - Limits and methods of measurement
EN61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques -
Section 2: Electrostatic discharge immunity test
EN61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques -
Section 3: Radiated, radio-frequency, electromagnetic field immunity test
EN61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques -
Section 4: Electrical fast transient/burst immunity test
EN61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques -
Section 5: Surge immunity test
EN61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement techniques -
Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
EN60529 - Degrees of protection provided by enclosures (IP code)
UL50 - Enclosures for electrical equipment
CAPITULO 9 - CARACTERISTICAS TÉCNICAS
345