Output Setup - Ambu aBox 2 Instrucciones De Uso

To import TLS certificates from a server:
• Press Server import
• Press the input field next to Certificate file name
• Press the input field next to Host name
• Press the input field next to Port number
• Press Import 42 .
Insert small screenshot slide 14 and
the below text:
To import TLS certificates from a USB
flash drive:
• Press USB import and wait while the
displaying unit searches for TLS
certificates on the USB flash drive.
•
Select the required TLS certificate and
press Import (Remember the
43
circles around the numbers.
Note: When the TLS certificate has been imported, the name of the certificate file is shown
below Imported TLS certificates.
Information needed
PACS name
PACS AE Title
Host name
Port number

8. Output Setup

The Administrator can view and reconfigure what Trigger Outputs (photo or video functions)
1 are sent via the output ports to a connected external medical imaging recorder.
To access the Trigger output menu:
• Press the Settings
• Press Setup and press Output setup.
You can configure the trigger output channels A, B, C and D. By default, trigger output A sends a
signal to take a photo and trigger output D sends a signal to start or stop a video recording on the
medical imaging recorder. Trigger B and C does not have any trigger signals assigned by default.
Reconfigure the trigger outputs as an administrator:
• Select the trigger output channel you wish to reconfigure (A, B, C or D) and select an
output signal in the selection menu that appears on the right side of the screen 2 .
• It is important that the assigned function on the trigger output port of the displaying unit
matches the function assigned to the connected input port of the medical imaging recorder.
•
Test if the system behaves as expected.
When set up correctly, the medical imaging recorder will capture a photo or start/stop
a video sequence, if the corresponding function is activated via the buttons on a connected
endoscope or directly on the buttons in the Live view tab.
38 .
40
41
42
Explanation
This is the name of the PACS. Used in the export menu to
select the PACS when transferring photos and videos.
PACS Application Entity Title.
The maximum length of the AE Title is 16 characters.
IP-address, MAC address or full web address for the PACS.
Network port no. for the PACS.
tab in the toolbar on the left.
39 and enter the file name.
, and enter the hostname.
and enter the port number.
39
40
41
43
21