Using Dual View; Taking Photos And Recording Videos; Current Procedure Folder - Ambu aBox 2 Instrucciones De Uso

Note: The stopwatch keeps running in the background even if it is covered by the Live View
screen, e.g. while Dual View is active.
Note: The stopwatch will stop running when the visualization device is removed. If the same
visualization device is reconnected within 60 seconds, the stopwatch will resume
automatically. If more than 60 seconds pass, press Continue procedure to resume the
procedure and keep the stopwatch running.

10.7. Using dual view

With Dual View, the Live View screen can show live image from two visualization devices
connected at the same time.
Use Dual View:
•
Connect two Ambu visualization devices to connector ports on the displaying unit.
•
The Live View screen shows two images, one larger and one smaller. The number shown in
each image corresponds to the number on the connector port of the displaying unit.

10.8. Taking photos and recording videos

Take a photo:
• Press the photo icon
Record a video:
• Press the video icon
• Press the video icon again to stop the video recording and save the video in the current
procedure folder.
Note: Zoom view will not be shown in recorded material.
Note: It is possible to take photos while recording a video.
Note: Maximum video recording time is 30 minutes per video. After a short warning on the
screen, the recording will be stopped automatically, and a new recording can be started.
There is no limitation on the number of recordings made during one procedure.

10.9. Current procedure folder

When a new procedure is started the current procedure folder is created automatically and
named with the date of the procedure followed by the procedure number of the day
(format: YYYY-MM-DD_XXX).
The image and video files created during the procedure are saved in the current procedure
folder. During the procedure, the files in the current procedure folder are accessible from the
Live View screen via the current procedure folder icon. After the procedure has ended, the
current procedure folder moves to the Recent folder, which is accessible via the Archive tab in
the Toolbar.
to take a photo and save it in the current procedure folder.
to start a video recording.
27