The Cintel Scanner Interface; Bi-Phase/Timecode Output - Blackmagic Design Cintel Manual De Instalación Y Funcionamiento

The Cintel Scanner Interface

Click on the 'capture' button in the UI toolbar at the top of the DaVinci Resolve screen to set the
media page to control your Cintel scanner. Open DaVinci Resolve's film scanner panel to set up,
calibrate, and choose options for logging or scanning a selected range of the currently spooled
roll of film. If you want more room for viewing the Cintel scanner controls, click the full height
button that's all the way to the right of the UI toolbar, and turn off the 'metadata' panel.
Cintel scanner controls in the Media page
Transport Controls:
‚
appearance to those used while in playback mode, now work to control the Cintel
scanner. Additional controls appear for moving forward or backward a frame at a time.
In and Out Controls:
‚
transport controls define a range of the film roll from which to capture.
The following groups of settings appear to the right of the 'media' page viewer when in
Cintel Scanner mode to scan clips from film into the media pool.

Bi-phase/Timecode Output

Use this menu to choose a synch standard if the scanner is connected via the XLR3 port to
external equipment that requires synchronization. To access the Bi-phase/Timecode Output
menu, click '...' under the 'capture' button in the toolbar.
Bi-phase/Timecode output controls in the media page
The transport controls under the viewer, while similar in
In Cintel Scanner mode, the In and Out buttons to the right of the
Capturing from Cintel using DaVinci Resolve 22