Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 53

To clean the particle transfer rollers, simply remove the O-ring
at the end of each PTR spindle and slide off the roller.
NOTE If you find your particle transfer rollers losing stickiness even after
washing, or have become difficult to mount and remove through age, wear and
tear, you can purchase new rollers from the Blackmagic Design website at
www.blackmagicdesign.com
Dusting
Dusting your scanner should be performed daily. This is as easy as using an air duster to
remove any particles from your scanner's skid plate, sprocket wheels and any other film
contact surface. This is best performed with the skid plate removed.
When dusting, it's worth paying special attention to the small plastic infill on your scanner's skid
plate. Dust buildup in this area can effect stabilization performance, so from time to time it's
worth wiping this down with a damp cloth.
Pay special attention to the skid plate infill when dusting
Servicing 53