Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 27

Adjusting the horizontal position
of the stabilization overlay. In this
screenshot, the overlay is not
aligned with the edge of the perf.
With the 16mm HDR skid plate installed, the stabilizer
aligns automatically to the other side of the perforation
to avoid interfering with the film image and improve
horizontal stability. When using a 'non-HDR' 16mm skid
plate, it functions the same as the 35mm skid plate.
TIP To closely check the results of your stabilization settings before
capturing, set the viewer to full resolution. Simply click on the options
settings at the top right corner of the viewer and select 'Full Resolution
Preview' from the drop down menu. This setting does not affect the
stabilization feature, but enables the best possible preview so you can monitor
how well it is performing.
It's worth mentioning that this setting will remain set until you change it back
to your previous setting. Full resolution is very GPU intensive and may result in
some frame lag. For best performance, turn full resolution off after
checking stabilization.
Hardware stabilization control correctly
positioned over a perforation in the viewer.
The transparent stripe in the stabilization
overlay touches the edge of the perforation.
Capturing from Cintel using DaVinci Resolve 27