Servicing - Blackmagic Design Cintel Manual De Instalación Y Funcionamiento

To update the internal software:
1
First make sure power is connected to your Cintel scanner and the Audio and KeyKode
Reader is connected to your computer via its USB type C connector.
2 Run the installers contained in the latest Blackmagic Cintel Installer software. Refer to
the 'getting started' section for more information.
3 After installing your Cintel scanner's internal software, launch Blackmagic Desktop
Video Setup and select the Cintel Reader device. Click on the 'about' menu heading
and look for a message about software updates. If an update is available, click the
'Update Now' button and follow the on screen prompts.
Check the 'about' tab of the Blackmagic Desktop Video Setup application
to see if a new version of the Cintel Reader software is available.
The reader's internal software is now up to date, giving you the latest settings, features
and compatibility.
TIP For information on how to launch Blackmagic Desktop Video Setup for your
specific operating system, refer to the Desktop Video Manual.

Servicing

To ensure optimal scan quality, it is important to keep your scanner clean and dust free. This is
easily done by regularly cleaning the particle transfer rollers and using an air duster to clean the
rest of your scanner's contact surfaces including its hard rubber rollers, sprocket wheels and
skid plate.
Cleaning the Particle Transfer Rollers
Cleaning the particle transfer rollers, or PTRs, should be done after every film run. To clean the
rollers, simply remove the O-ring at the end of each PTR spindle and slide off the roller. Apply
warm, soapy water to the rollers using household dishwashing detergent and allow them to air
dry. We don't recommend towel or blow drying as this can deposit new particles on the rollers or
heat deform them. Once dry, simply slide the rollers and O-ring back on and you're ready to scan.
If the PTRs are becoming hard to remove or install, apply a thin layer of silicon grease to the
inside of the O rings. This will help maintain lubrication so they are easier to remove for cleaning.
Servicing 52