Wall Mounting - Blackmagic Design Cintel Manual De Instalación Y Funcionamiento

Wall Mounting

Cintel's elegant industrial design and narrow profile make it ideal for wall mounting.
To do this, the first thing you'll need to do is remove the feet and support strut from the base of
your scanner.
1 Place your scanner face up with its feet over the edge of a solid, stable surface capable
of supporting your scanner's weight.
2 Unscrew the pair of M8 screws from each foot using a 6mm hex key, then gently
remove the feet.
3 Using a Phillips head screwdriver, remove the support strut between the feet. Store
the support strut in a safe place together with your scanner's feet so you can always
reattach them later if you need to relocate your scanner.
Your scanner's desk mount feet and support strut can be removed
if you want to mount your scanner to a wall.
The locations of the four M8 mounting screws on your scanner's back panel are shown below.
Be sure to use M8 screws when securing your scanner to a wall mount.
M8
400mm
M8
800mm
M8
M8
Unpacking and Mounting 7