Locating And Protecting Your Analyzer - Adam Equipment PMB 53 Manual Del Operador

3.5

LOCATING AND PROTECTING YOUR ANALYZER

In order to keep your analyzer functioning at its best we suggest that you do
the following:
Keep the analyzers clean.
before they become baked on.
8
| P a g e
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
Make sure there are no heat sensitive or
flammable material above the analyzer. The
exhaust from the weighing chamber can be very
hot.
Make sure the analyzer is located on a strong
table and free from vibration.
Avoid unstable power sources. Do not use near
large users of electricity such as welding
equipment or large motors.
Keep free from vibration. Do not place near
heavy or vibrating machinery.
Avoid high
condensation. Keep away from direct contact
with water. Do not spray or immerse the
analyzers in water.
Do not place
conditioning vents or fans that may cause a
draft and unstable readings.
Clean up spills in the weighing chamber
humidity that
near open
© Adam Equipment Company 2017
might cause
windows, air-