Adam Equipment PMB 53 Manual Del Operador página 13

 Materials that emit toxic, caustic or noxious fumes should only be tested in
suitable fume hoods or with other ventilation.
 Materials that will have a film on the surface during drying may cause high
internal pressures to be present. These materials should not be tested
using this method.
 Materials that emit aggressive or corrosive fumes (such as acids) should
be tested using small quantities of material in an area with good
ventilation.
 See Section 14 for further information on sample preparation.
The user shall be liable and responsible for any damage that arises in
connection with this moisture analyzer.
11
| P a g e © Adam Equipment Company 2017