Store And Recall Pmb Setting From Usb Memory - Adam Equipment PMB 53 Manual Del Operador

10.2 STORE AND RECALL PMB SETTING FROM USB MEMORY

To store or recall PMB settings on a USB memory, simply plug the memory
into the USB hub interface.
inserted and display a screen to guide you.
The display will show a message showing the USB is installed:
To select the option of storing the configuration data to the memory press the
[Dspl/] key to change the display to select Configuration Store
Press [Setup/Enter] to enter the configuration saving function. The display
will show a suggested file name. The name will be the next logical name for
the configuration file based on what data is already on the USB memory. For
example if CONFIG1 and CONFIG2 are already stored, then it will display
CONFIG3.
Press [Setup/Enter] to confirm the action.
escape back to the original USB display.
53
| P a g e
The analyzer will detect the memory has been
CONFIG LD
USB
CONF STORE
USB
CONFIG3
USB
CONFIG3
Store
Or press [0/T / Esc] to
© Adam Equipment Company 2017