Files On A Usb Memory Device - Adam Equipment PMB 53 Manual Del Operador

The USB I/O interface is similar to the RS-232 in that it is also a serial
interface. The functions of the RS-232 and USB I/O are similar. See section
11.0 for more details on using the USB I/O.
The USB Host is designed to allow a USB memory device to be used as an
external memory for the analyzers. The set-up parameters for operation and
test procedures can be stored and up-loaded from the memory device.
Results of drying test can be stored in the USB memory device. See sections
6.5 and 9.0 for further details on using the USB Host with a memory device.
Adam Equipment supply AdamDU Data Collection software that will allow the
user to use the full capabilities of the data interfaces. Contact your supplier or
Adam Equipment for more details.

5.2.1 FILES ON A USB MEMORY DEVICE

When a USB memory device is used the analyzer will create a series of
folders used to store files.
CONFIG and RESULT, all under a master folder called MOISTURE.
X:\ MOISTURE
X:\ MOISTURE\REPORT
X:\ MOISTURE \PRESET
X:\ MOISTURE \CONFIG
X:\ MOISTURE \RESULT
Where X is the device letter your computer will assign to the memory device.
When the memory device is first plugged into the PMB the memory is
inspected and the folders will be created if they do not already exist. This
process may take a few seconds before the analyzer will show a display
allowing access to the USB memory.
All files are stored in a text format with a file type of .txt.
the analyzer are all small enough that any size memory device will work.
16
| P a g e
These folders are called, REPORT, PRESET,
© Adam Equipment Company 2017
The files used by