Recalling Test Results; Deleting Test Results - Adam Equipment PMB 53 Manual Del Operador

8.3

RECALLING TEST RESULTS

When a test result has been stored in the PMB memory it can be recalled to
the display.
During normal weighing mode press the [Dspl/] key. The display shows
Pressing the [Dspl/] or [Test/] will change the option to PRINT, DELETE
or DELETE ALL.
When the selection shows PRINT, press [Setup/Enter] and the display will
show the first stored test result using the file name given it when stored.
Press the [Dspl/] or [Test/] key to change the file name to the next
available. When the test result desired is found press the [Setup/Enter] Key
to recall the details and print them in the same format they were stored in,
See section 11.0
Pressing [0/T / Esc] will return the analyzer to normal operation.
8.4

DELETING TEST RESULTS

When a test result has been stored in the PMB memory they can be deleted
individually or all at one time.
38
| P a g e
PRINT
RES00032
© Adam Equipment Company 2017