Setup Parameters; Backlight - Adam Equipment PMB 53 Manual Del Operador

10.1.2

SETUP PARAMETERS

The user parameters that control the PMB are shown under the SETUP.
When "SETUP" is displayed, press the [Setup/Enter] key. The options for
each parameter can be scrolled through by using the [Dspl/] or [Test/]
keys.
TIME
DATE FORMAT
EUROPE (dd/mm/yy)
USA (mm/dd/yy)
ASIA (yy/mm/dd)
DATE
USER ID
KEY BEEPER
TEST BEEPER

BACKLIGHT

45
| P a g e
Set Time using the numeric entry method
(see section 6.1)
Select the format the date will be shown
in.
Set Date using the numeric entry method
(see section 6.1)
Set year, month date when requested.
Enter a user number to identify this
analyzer
When enabled will beep any time a key is
pressed.
On= Enable
OFF= Disable
When enabled will beep 3 times quickly
when a drying test is completed.
On= Enable
OFF= Disable
On
OFF
AUTO
© Adam Equipment Company 2017